Measuring Pipe Diameter Range
DN50~DN1200
Flow Velocity Measurement Range
1~10 m/s
Accuracy
0.5%
Repeatability
0.2%
Supported Medium Type
Water Medium: pure water, tap water, raw water, demineralized water/soft water, circulating water, defluoridated water
Supported Pipe Material
1. Pipe Materials
① Metals: Carbon steel, stainless steel, copper, aluminum
② Plastics: PE/HDPE, PVDF/PVC
2. Pipe Operating Conditions
① The pipe wall surface is relatively smooth; obvious rust or paint bulging requires grinding the pipe wall.
② The pipe interior is unlined and free of scale.
Medium Temperature
-40~120 ℃
Ambient Temperature
-40~60 ℃
Transmitter Housing
Aluminum alloy, surface painted
Sensor Body
316 stainless steel
Protection Level
IP67 for Transmitter, IP68 for Sensor
Output Signal
1. 4 ~ 20 mA HART
Output range: 4 ~ 20 mA (NAMUR standard)
Load capacity: 700 Ω
Resolution : 0.4μA
Mode: Active and Passive
2. Modbus
3. Pulse / function output
Optional settings:
① Pulse output: Pulse width range 0.05~2,000ms , maximum pulse frequency 10 kHz
② Frequency output : Maximum frequency 10 kHz
③ Function output: Switch value, which can be used to indicate status information, including: diagnostic response, limit value, flow direction check, and status.
Input
1. 4 ~ 20 mA input: maximum input voltage ≤ 30V (passive), supports active and passive input
2. Switch input: Maximum input value 30V, response time 5 ~200ms configurable
Low level: -3 ~5VDC, High level: 12 ~30VDC
Power Supply
AC: 85~265VAC, 50± 4Hz
DC: 24V DC (12 ~36V DC )
＜15W
Installation Method
Transmitter: Standard bracket included, supports wall mounting and pipeline installation
Sensor: Supports fixture installation and clamp installation
Dimension
Transmitter: 240×171×71 mm (L×W×H)
Sensor: 51×32×35 mm (L×W×H)
Weight
Transmitter: 2.3 kg
Sensor: 0.52 kg/pair