Places Your Home Might Be Losing Heat — And How to Check Them

Nov 13, 2026

Your heating is on, but some rooms still feel colder than they should. Where is all that warmth going?

Heat loss isn't always obvious. A draught around a window, a cold patch in a wall corner, or an overlooked gap around an attic hatch may all affect how comfortable your home feels.

The good news? You don't need to be a building expert to start investigating.

Here are four places worth checking this winter, why they matter, and what you can do about them.

 

Windows & Doors: Are Your Frames Properly Sealed?

 

 

Even homes with double-glazed windows can experience draughts.

Over time, weatherstripping can wear out, seals can become damaged, and frames may need adjustment. These small gaps allow warm indoor air to escape while cold outdoor air enters.

It's also worth knowing that heat can pass directly through glazing, even when the window is properly sealed. Heat transfer and air leakage are two different things.

How to check:

  • Try the paper test. Place a sheet of paper between the window and its frame, close the window, and gently pull. If it slips out easily, the seal or adjustment may need checking.
  • Feel for draughts. On a cold, windy day, carefully check around window and exterior-door edges for moving air.
  • Use thermal imaging to compare the frame and surrounding wall. Unusual cold patterns around the frame or edges may suggest areas worth investigating further.

What you can do:

Replace damaged seals or weatherstripping and have poorly fitting windows or doors adjusted. If the glazing itself is inefficient, consider professional advice on suitable improvements.

 

Exterior Walls & Corners: Could It Be a Thermal Bridge?

 

 

Have you noticed that one corner of a room feels colder than the rest, even when the heating is running?

One possible explanation is a thermal bridge.

A thermal bridge is an area where heat transfers more readily through the building structure, often because insulation is interrupted or a material conducts heat more easily than its surroundings.

Common locations include wall-to-ceiling junctions, window reveals, balcony connections, and exterior wall corners.

These areas may develop cooler interior surfaces, which can also increase the risk of condensation when indoor humidity is high.

How to check:

  • Look for persistent cold patches in thermal imaging. Pay particular attention to exterior wall corners and wall-to-ceiling junctions.
  • Check for condensation. Repeated moisture, discoloration, or mold around a cold area may indicate a problem worth investigating.

What you can do:

Keep furniture from restricting airflow around cold exterior walls, manage indoor humidity, and consult an insulation specialist if the problem persists.

A cold spot alone doesn't prove that insulation is missing. Building design, airflow, moisture, and heating conditions can all influence surface temperatures.

 

Roof & Attic: Don't Overlook What's Above You

 

 

Your roof is another important part of your home's thermal envelope.

According to Ireland's Sustainable Energy Authority (SEAI), homes can lose up to 30% of their heat through the roof, depending on insulation and building conditions.

Even if your attic has insulation, gaps, compression, damaged materials, or an uninsulated hatch can reduce its effectiveness.

How to check:

  • Check insulation coverage in thermal imaging. From a safe access point, look for obvious gaps or areas where insulation is missing.
  • Inspect the attic hatch. Look for an uninsulated panel or damaged seals around its edges.

What you can do:

Have inadequate insulation corrected and make sure the attic hatch is properly insulated and draught-proofed.

Never block roof ventilation openings, and avoid entering an attic without safe access and suitable flooring.

 

Roller Shutter Boxes: The Hidden Weak Point Above Your Windows

 

 

Here's one area many homeowners may not think to check.

In homes fitted with roller shutters, the shutters roll into a housing, often positioned above the window.

While roller shutters can help reduce heat transfer through windows when closed, older or poorly insulated shutter boxes may become weak points themselves.

Thin housing walls, inadequate insulation, or poorly sealed access panels and shutter-belt openings can allow unwanted heat transfer or draughts.

How to check:

  • Feel around the housing. On a cold day, check whether you notice draughts around the shutter box or belt opening.
  • Use thermal imaging to look above the window. Cooler-than-expected surface patterns around the shutter housing may suggest a thermal weak point.

What you can do:

Depending on the construction, suitable insulation inserts or improved seals may help. Ask a qualified professional about the best approach, particularly if the shutter housing is concealed within the wall.

 

See the Clues Your Home Is Giving You

Not every heat-loss problem is visible to the naked eye.

A thermal camera can help you observe surface-temperature differences around window frames, wall corners, ceilings, and shutter boxes.

For useful comparisons, check when your home is heated and there is a clear indoor-to-outdoor temperature difference. Avoid relying on surfaces recently warmed by direct sunlight, and compare similar materials under similar conditions.

Remember: a thermal image shows temperature patterns, not a confirmed diagnosis. An unusual cold area may suggest where to investigate, but further checks may be needed to identify the cause.

With HIKMICRO Home thermal imaging, you can turn those temperature differences into useful clues and make more informed home-maintenance decisions.

 

A Warmer Home Starts With Knowing Where to Look

You don't have to investigate everything at once.

Start with the places you can safely check, take note of recurring issues, and seek professional advice when repairs involve insulation, building structure, or inaccessible components.

See Early. Understand Better. Act Confidently.

Know Your Home.

Explore HIKMICRO Home

 

Sources & Further Reading

 

Hikmicrotech.com would like to use analytics cookies and other similar tracking technologies ("Cookies") to help us improve our website. The Cookies collect information in a way that does not directly identify anyone. For more information about the Cookies we use, see our cookies policy here.

Accept
Reject
Manage Cookies
Request Demo
Online Service
Contact Sales
Become a Dealer
Technical Support
Where to Buy