How Acoustic Cameras Bring a New Visual Approach to Railway Vehicle Condition Inspection and Maintenance

Oct 29, 2026
Cover 3 Cover 3

Railway vehicle maintenance presents two common inspection challenges. When a train passes an observation point in service, wheel-rail contact, bearings, brakes and traction systems generate a complex mixture of sounds. Recordings and listening alone make it difficult to determine which wheel position is associated with an unusual noise. On stationary vehicles, compressed-air leaks in braking and pneumatic suspension systems consume the available air supply, while long pipe runs and numerous connections make the leaks difficult to locate.

A trackside field test in Germany using the HIKMICRO AI56 acoustic camera demonstrated the potential of acoustic imaging for condition screening as trains pass.

 

Background to the German Field Test

A passing train produces several sounds at once. Wheel-rail contact, brakes, bearings, suspension and traction systems can all contribute, while speed, wind and reflections affect the sound reaching a trackside observer. A conventional recording combines these sounds, making it difficult to identify which part of the moving train produced a particular noise.

Acoustic imaging adds location information. The AI56 uses a microphone array to determine the direction of detectable acoustic energy and overlays a coloured acoustic map on a visible-light image. As the train passes through the camera’s field of view, operators can see where acoustic activity appears in relation to the vehicle body and individual wheel positions.

The AI56 observed the train from the trackside without contacting the vehicle or requiring sensors on each wheelset. This allowed the test team to observe acoustic activity while the train was moving and the relevant components were operating under the test conditions.

Image 3.1 Image 3.1

 

 

What the AI56 Observed During the Test

As the train passed, the acoustic overlay could be associated with the wheel positions appearing in sequence in the visible-light image. Different wheel positions showed different acoustic patterns, with a stronger response observed near the driven wheels than at other wheel positions in the image.

The main value of this result was the visual location reference it provided. Hearing a momentary increase in noise alone makes it difficult to determine which part of a moving train produced it. In an acoustic image, the response is overlaid directly on the scene. Reviewers can locate the corresponding position in the image sequence, compare neighbouring wheel positions during the same pass and give the maintenance team a more specific area to investigate.

Saved acoustic images allow the team to continue reviewing the observations after the train has passed. Voice and text annotations can record the vehicle number, direction of travel, test conditions and the reason for flagging a particular wheel position. HIKMICRO Analyzer Acoustic supports subsequent analysis and report preparation.

These location references give depot maintenance teams a clear starting point. Technicians can review the saved image sequence, identify the flagged wheel position and select suitable inspection tools for that area.

Image 3.2 Image 3.2

 

What the Results Show

Under the field test configuration, acoustic imaging was able to display wheel-position-related acoustic activity as the train passed and provide an initial indication of differences between positions. This offered useful information for deciding where a follow-up inspection should begin.

The stronger acoustic response near the driven wheels was an observation, not a measurement of wear. The traction system, vehicle design, load, wheel-rail interaction and nearby sound sources can all influence the signal. The test did not establish a direct relationship between a stronger response and greater wheel wear or any specific fault.

The appropriate maintenance interpretation is that a particular wheel position behaved differently from others during this test and should be compared with further pass-by records or considered for additional inspection. Depending on the sound-source location, follow-up work could include wheel and tread inspection, bearing or brake checks, drive-system inspection, or examination of the corresponding track section.

Acoustic imaging contributes before these specialist checks by identifying areas that deserve attention and retaining visual evidence for the subsequent investigation.

Image 3.3 Image 3.3

 

From a Single Test to a Useful Baseline

A single field test can show that the equipment reveals differences. Developing a condition-screening method requires a further distinction between repeatable changes and normal variations in operating conditions. This calls for comparable pass-by records linked to conventional inspection results.

Where conditions allow, the camera position, distance, viewing angle and selected frequency band should remain as consistent as possible. Train speed, direction of travel, vehicle type, load, weather and track conditions should also be recorded. These details help explain differences between images from separate passes.

Continued recording of comparable vehicles and their wheel positions can gradually establish a baseline. Engineers can assess whether driven wheels normally produce a stronger pattern, whether the same position consistently stands out and whether its response changes over time. Frequency adjustment can help reduce the influence of other background sound sources, but comparisons between similar observations should use the same settings.

Each flagged wheel position should be linked to the results of the follow-up inspection. If conventional checks confirm a wheel, bearing, brake, drive-system or track problem, the corresponding acoustic images can provide a useful reference for similar cases. Normal inspection results are equally valuable, helping refine the baseline and identify expected characteristics.

Through repeated testing, comparison, inspection and recording, these visible differences may gradually support practical screening criteria. The AI56 can observe several wheel positions without sensors being installed on each vehicle, giving depot teams clearer information for planning further investigation.

 

Locating Compressed-Air Leaks in the Depot

Acoustic imaging is more established in another railway application: locating compressed-air leaks on stationary vehicles that have been secured for inspection. Railway braking, suspension and door systems may use compressed air. Pressure or flow testing can indicate air loss, but technicians still need to find the leaking hose, fitting, valve, pipe connection, air reservoir or actuator.

Checking connections individually can take considerable time on long or densely arranged air circuits. Once the system has been pressurised in accordance with the operator’s established safety and maintenance procedures, an acoustic camera can scan several exposed components from a distance. Where escaping air produces a detectable acoustic signal, the image highlights an area for further inspection.

Technicians can then use the established railway inspection method to confirm the leak at that location, complete the repair and scan again. Images, voice notes and text annotations can document the leak position and the post-repair checks. This helps reduce search time and allows maintenance teams to reach the relevant component more quickly.

The German pass-by test and depot leak inspection address different problems, but the HIKMICRO AI Series serves a similar purpose in both. It relates otherwise invisible sound sources to the visible scene, narrows the search area and preserves evidence for further inspection. For pass-by condition screening, the next step is structured repeat testing, with the observations linked to confirmed maintenance findings.

HIKMICRO AI Series acoustic cameras provide a non-contact means of visualising sound. During a train’s passage, they can show acoustic differences between wheel positions without additional sensors on the vehicle, helping identify priorities for subsequent inspection. Images and annotations can also be retained for team handovers and review. In trackside screening, acoustic imaging complements existing railway inspection systems by giving maintenance teams an additional source of visual information.

 

Hikmicrotech.com would like to use analytics cookies and other similar tracking technologies ("Cookies") to help us improve our website. The Cookies collect information in a way that does not directly identify anyone. For more information about the Cookies we use, see our cookies policy here.

Accept
Reject
Manage Cookies
Request Demo
Online Service
Contact Sales
Become a Dealer
Technical Support
Where to Buy